ShakeToUnlock
使用传感器来锁定\解锁屏幕以简单和直接的方式。对于那些谁拥有非原稿盖板或断电源按钮特别有用。有限的电池消耗。接近传感器”LOCK再见不自主的动作，而该设备在YOUT口袋。UNL..
基本信息
- 更新日期:
- 包名:
- ale.shaketounlock
- 版本:
- 1.10
- 大小:
- 2.2M
- 类型:
- 效率应用
- 平台:
- 安卓
- 评分:
- 发布日期:
- 2019-11-04
- 价格:
- 免费
- 开发者:
- ale99
ShakeToUnlock应用截图
ShakeToUnlock应用简介
Use sensors to lock\unlock the screen in an easy and immediate way.
Particularly useful for those who have a non-original cover or a broken power button.
Limited battery consumption.
********* PROXIMITY SENSOR’ *********
LOCK – Goodbye involuntary actions while the device is in yout pocket.
UNLOCK- You won’t have to press the power to unlock the phone!
LOCK AND UNLOCK – The cover will work as a switch, while with a gesture it is possible to invert the screen state.
The power button will be active to allow you to see notifications through a transparent cover.
Warning: A magnetic cover that already supports interaction with the screen may interfere with this app.
********* ACCELEROMETER *********
LOCK – Are they going to detect you while using your cellphone? With a quick movement of the hand the screen will turn off without waking up suspicious! – recommended intermediate sensitivity.
UNLOCK When you take the device from the table, the screen immediatly turns on so you can check the notifications – maximum sensitivity recommended.
LOCK AND UNLOCK – Perform both actions with movement – ecommended medium-low sensitivity.
If the proximity sensor is in “lock” or “lock and unlock” mode, the device will not accidentally wake up with the cover closed.
Caution: The accelerometer has an high battery consumption and is activated only when strictly necessary. After a long period of screen inactivity (currently 4 hours), it is automatically disabled.
****** Notes *******
If you close the app through the task manager, the service will be immediately stopped.
You must activate the service at each system boot.
In case of malfunctions that do not allow you to turn off the app (eg the screen continually goes off), just restart the device (hold down the power button for about 10 seconds).
To be able to efficiently perform all the tasks, you must set up the app as a device administrator. The request is automatic at every start of the service and is disabled when it is terminated.
If you can not uninstall the app (for example, because the service is currently active or has been stopped by the task manager during operation):
1) open the app
2) if active, disable the service
3) try again (in case of problems contact support)
The service may malfunction \ not work on devices with low-end sensors.
Please always report bugs or unsupported devices so we can always improve 🙂
keywords: screen, shake, shake to lock, shake to unlock, sensors, proximity, accelerometer, cover, lock, unlock, on, off, battery save, movement
中文翻译
使用传感器来锁定\解锁屏幕以简单和直接的方式。
对于那些谁拥有非原稿盖板或断电源按钮特别有用。
有限的电池消耗。
*********接近传感器” *********
LOCK – 再见不自主的动作，而该设备在YOUT口袋。
UNLOCK-你不会有按电源解锁手机！
锁定和解锁 – 封面将作为开关，同时用手势就可以反转屏幕状态。
电源按钮将被激活，让您可以通过透明盖看到通知。
警告：已支持与屏幕交互的磁性盖可以与此应用程序干扰。
********* *********加速度计
LOCK – 他们要同时使用您的手机检测到您？随着手的快速移动的画面将关闭，而不会醒来可疑！ – 建议中间灵敏度。
UNLOCK当你从表中取设备，屏幕立刻打开，所以你可以检查的通知 – 最高感光度建议。
锁定和解锁 – 执行与运动两个动作 – ecommended中低灵敏度。
如果接近传感器处于“锁定”或“锁定和解锁”模式，该设备将不会意外地唤醒与所述盖封闭。
注意：加速度计具有高电池消耗和被激活，只有当严格必要的。后屏幕不活动（目前4小时）的长周期时，被自动禁用。
******注*******
如果你通过任务管理器关闭应用程序，该服务将立即停止。
您必须在激活系统每次启动该服务。
在故障不允许你关闭应用程序的情况下（如屏幕不断熄灭），只需重启设备（按住约10秒钟，电源按钮）。
为了能够有效地执行所有任务，你必须设置应用程序的设备管理员。该请求是在自动服务的每次启动，并且当它被终止被禁用。
如果您无法卸载应用程序（例如，因为服务是当前活动或操作过程中的任务管理器已停止）：
1）打开应用
2）如果活性，禁用服务
3）再试一次（在出现问题联系支持的情况下）
该服务可能会发生故障\无法在低端传感器的装置工作。
请随时报告错误或不支持的设备，所以我们总是可以提高:)
关键字：屏幕，摇，摇锁定，摇解锁，传感器，接近，加速度计，盖，锁定，解锁，开，关，电池节省，运动
类似ShakeToUnlock应用
